Vertical cutting machine for trimming long or short blocks to the required width. The IS-BA has a maximum trimming length of 200 mm per cutting operation.
|Width||900 mm - 2.500 mm|
|Height||1300 mm||1500 mm|
PUR soft foam, reticulated ether-based polyurethane, reticulated PU ester foam, HR, viscoelastic foam, other
For a better guiding of the knife in order to ensure the accurate trimming of different materials.
Efficient grinding with a very stable and powerful motor-driven grinding unit.
Friction-driven grinding unit
Networking of the machinery and the operative functions.
Of the position of the cutting unit on the control panel.
Of the position of the side guide on the control panel.
In order to guarantee a safe operation of the machine, the entire interior of the switch cabinet is cooled.
Of the trimming units. Very precise, motor-driven positioning of the cutting units. Pre-selection of the position on a separate control panel.
Fourth cutting unit
Additional cutting unit for center cut. Offers the possibility to simultaneously cut a maximum of 3 trimmed blocks from one long block or to perform a further center cut (4-wheel version).
Third cutting unit
For the 4-wheel version. Additional cutting unit for center cut. Offers the possibility to simultaneously cut a maximum of 3 trimmed blocks from one long block.
In the area of the side guide with a length of 2000 mm. With or without drive.
Stable side guide
Including a mechanical positioning indicator. Parallel alignment of the block to the cutting units upstream of the IS-BA. Allows making minimal trimming cuts. Unit can be controlled remotely by means of a central control panel.
Steel knife bar
To achieve very small trimming cut thicknesses with long blocks, we recommend the use of a steel knife bar.
Motor-driven grinding unit
For an even finer grinding of the band knife
Cutting-to-length, trimming, preparing and dividing blocks, fast model (40 m/min), fully automatic
Cutting-to-length, trimming, preparing and dividing blocks, space-saving model, fully automatic
Trimming of blocks and cutting of sheets, manual table adjustment
Automatic trimming of blocks and cutting of sheets