Close
The vertical foam cutting machine
Upper knife guide for precise cuts
Knife protection unit adjustable by motor
Control
Band saw
Hand wheel to adjust the knife tension
Hand wheel in connection with a ratchet (optional)
Motor-driven grinding unit
Digital position indicator of the side stop
  • The vertical foam cutting machine
  • Upper knife guide for precise cuts
  • Knife protection unit adjustable by motor
  • Control
  • Band saw
  • Hand wheel to adjust the knife tension
  • Hand wheel in connection with a ratchet (optional)
  • Motor-driven grinding unit
  • Digital position indicator of the side stop

IS-L

Vertical cutting machine

Trimming of blocks and cutting of sheets, manual table adjustment

Cutting soft foams with the highest precision

Vertical cutting machine for cutting or trimming block material or sheets and for stenciling. The IS-L with a stationary cutting head and a movable table cuts material with a volume weight of up to 180 kg/m³.

About 17% waste reduction

for processing a foam block while using our nesting software Cube.

Accurate cutting results

Splitting lighter materials within very narrow tolerances due to the stable, welded construction of the machine.

Less vibration and higher speed

Better cutting accuracy because the cutting head is guided in linear guides.

Proper fixation of the material

due to the precise adjustment of the side stops using tooth belts with an optional holding-down device.

Right positioning of the block

due to the side stop which prevents the moving of the block.

Constant grinding quality

due to the (optional) grinding unit with a cup wheel grinding disk where the grinding surface remains the same.

Easy handling of heavier blocks

due to the turnable air cushion system.

Minimizing cutting time

Cutting in both directions is possible and teach-in-points can be set to minimize the cutting way until the block is cut.

High machine availability

due to high quality parts with a long service life and easy access to spare parts, e.g. control panels from Siemens

Securing the best cutting results

by having the cutting head near the block thanks to its adjustable height.

Easy and comfortable operation

Only one operator required, state-of-the-art control technology.

IS-L: Vertical knife cutting has never been smarter

Vertical cutting machine for cutting or trimming block material or sheets and for stenciling. The IS-L with a stationary cutting head and a movable table cuts material with a volume weight of up to 180 kg/m³.

Playing this video requires sharing information with YouTube.

Technical data

Vertical cutting machine for cutting or trimming block material or sheets and for stenciling. The IS-L with a stationary cutting head and a movable table cuts material with a volume weight of up to 180 kg/m³.

  • Dimensions

    Standard Options
    Width1.250 mm1600 mm, 2200 mm
    Height1300 mm650 mm, 1500 mm
    Length2200 mm2500 mm, 3100 mm

  • Material

    Ether-based polyurethane, flame-protected ether polyurethane, high resilience PU foam, viscoelastic ether-based polyurethane, flame-protected viscoelastic ether PU, combustion-modified highly resilient PU foam, reticulated ether-based polyurethane, ester-based polyurethane, reticulated ester-based PU foam, CM-PU ester foam, rebonded polyurethane, PU gel foam, extruded polyethylene, low density polyethylene, ethyl vinyl acetate (EVA), sponge rubber, natural rubber, mineral wool, viscose foam

  • Cutting tools

    GBV4T, TB2 No. 11, TB2 42, TB2T-K18

Downloads

Foundation plan

IS-L

Standard

  • Knife wheels with special coating

  • Pneumatic knife-tensioning

  • Welded steel construction

  • Adjustable knife drive

    Infinitely variably adjustable knife speed from 10 - 28 m/s (necessary for special foams)

  • Motor-driven knife protection unit

    The upper guide can be moved to measure corresponding to the material height in order to guarantee an optimum knife guiding. At the same time it protects the knife in the cutting area that is not used. From the operator panel the knife guide can be moved to the desired position by motor.

  • Intuitive control panel

  • SOPHIEaccess

    Networking of the machinery and the operative functions.

    More information

Options

  • Optical knife-grinding control

  • Band saw

    The set knife is used for cutting harder materials.

  • Left side stop increased from 750 mm to 1000 mm

  • Ratchet for side stop adjustment

    This ratchet guarantees an exact advance in case of recurrent cutting widths.

  • Digital position indicator

    Electronic indication for the direct registration and indication of the limit stop position, max. resolution 0,1 mm.

  • Grinding dust extraction unit

    The machine is equipped with a grinding dust extraction unit. A casing contains a ventilator, a dust collector and a dust container and is fixed to the cutting unit.

  • Spraying unit for silicone

  • Rigid foam version with grinding dust extraction unit on customer side

  • Manual stripping device

    With the stripping device, two hard metal plates are manually placed on the knife so that deposited materials that are stuck together to the knife and adhere to it can be removed.

Compare other machines of the category "Vertical cutting"

BZM-A

BZM-A

Vertical cutting machine

Cutting-to-length, trimming, preparing and dividing blocks, fast model (40 m/min), fully automatic

BZM-I

BZM-I

Vertical cutting machine

Cutting-to-length, trimming, preparing and dividing blocks, space-saving model, fully automatic

IS-BA

IS-BA

Vertical cutting machine

For the lateral trimming of long blocks

IS-M

IS-M

Vertical cutting machine

Automatic trimming of blocks and cutting of sheets

IS-L

Vertical cutting machine

What Bäumer offers

Looking for the right machine for your needs?

Bäumer offers a wide range of individual machines that meet your specific requirements. Explore our foam cutting machines to find the right solution for your needs.

Machines

Find out how your processes can benefit from Bäumer.

Process optimization with the right software: With our software solutions, we provide you with the tools that enable you to react quickly to the day-to-day demands of the market.

Software

Customized services for unique processes.

The many different people, machines and processes in a company do not fit into any general scheme. Discover our solutions for a wide range of different needs.

Services