Vertical cutting machine
Cutting-to-length, trimming, preparing and dividing blocks, fast model (40 m/min), fully automatic
Vertical cutting machine for the trimming, cutting or splitting of short and long blocks.
Vertical cutting machine for the trimming, cutting or splitting of short and long blocks. The BZM-A works fully automatically and reaches a maximum cutting speed of 40 m/min.
|Width||2200 mm||2500 mm|
|Height||1300 mm||650 mm, 1500 mm|
|Length||2400 mm||2600 mm, 3050 mm, 3500 mm, 4400 mm|
Block and sheet ware made from PUR Soft Foam, PUR Rebond Foam, Visco-Elastic Foam, Latex
GBV4T, TB2 No. 11, TB2 42, TB2T-K18
max. 40 m/min
Different working modes
Trimming short blocks: either only at the front and at the rear, on all four sides or on all four sides with a center cut. Sectioning of the block into further single blocks and individual rectangular cuts.
Cutting sheet stacks
due to an on-board knife gap cover This prevents pinching or ripping of the material.
Transport conveyor system
with loading and unloading conveyors of various lengths for the processing of short blocks in automatic mode. The conveyorss are positioned either in front of or behind the machine. This serves to prevent machine downtime.
Networking of the machinery and the operative functions.More information
Block weighing device
for short blocks. It is integrated into the existing conveyor belt behind the cutting unit in the cutting direction and is used to determine the short block weight.
for the precise positioning of the block. Recommended for the automatic feeding of the machine.
In order to guarantee a safe operation of the machine, the entire interior of the switch cabinet is cooled.
Grinding dust extraction
for extracting the grinding dust during the grinding process.
Motor-driven grinding unit
Optional equipment of the machine with ground knife in connection with a motor-driven grinding unit.
Motor-driven knife guide
to protect the knife in the unused cutting area. It reduces the non-guided knife length for better fixation of the knife, optimizes the cutting quality and enables the maximum cutting speed.
Optical knife-grinding control
for a better surveillance of the knife grinding process and to achieve an optimal cutting appearance.
Measuring device to calculate the percentage of remaining waste after block trimming by means of the PLC control. The waste proportion after the trimming of the block is indicated via a light barrier control.
Cutting-to-length, trimming, preparing and dividing blocks, space-saving model, fully automatic
For the lateral trimming of long blocks
Trimming of blocks and cutting of sheets, manual table adjustment
Automatic trimming of blocks and cutting of sheets