Close

BSM

Horizontal splitting machine

Processing materials of medium hardness into sheets, reversing table, especially suitable for beginners

Horizontal splitting machine for a wide range of rigid materials.

The perfect entry-level splitting machine for customers with a small material portfolio wanting to start splitting rigid materials. Easy, comfortable operation and cost reduction – only one operator required

Accurate cutting results with almost no deviation

Splitting hard materials up to 45 Shore A with very precise tolerances due to stable, welded machine construction.

Maximal material efficiency

Due to precise height adjustment up to 4 mm above the table

Reducing production time and cost

Due to fast height adjustment with up to 40 mm/s thanks to the ball bearing screws.

Perfect cutting of various materials

Due to cutting angle adjustment up to 7° for more flexibility regarding the production range.

Less movement of material

Due to efficient vacuum power with 300 mm water column

Sharp knife – constant grinding quality

No longer operator-dependent due to automatic grinding unit with cup wheel grinding disk for knife grinding (optional)

Entry-level splitting machine

For a small material portfolio and to start splitting harder materials.

Easy operation and cost reduction

Intuitive operation, only one operator needed.

High machine availability

Due to high quality parts with a long service life and easy access to spare parts, e.g. control panels from Siemens

BSM: Effectiveness meets simplicity

Horizontal splitting machine for a wide range of rigid materials. Splits sheets with a thickness between 1 and 200 mm for thin foils or simple mattresses.

Playing this video requires sharing information with YouTube.

Technical data

The BSM is available in different table dimensions to match the specific customers requirements. It splits harder materials up to 45 Shore A.

  • Dimensions

    Standard Options
    Width1600 mm1200 mm, 2200 mm
    Height1000 mm650 mm, 950 mm, 1300 mm
    Length2200 mm2600 mm, 2800 mm, 3050 mm, 4400 mm, 5500 mm, 6600 mm
  • Material

    FrameFoam, reticulated ether polyurethane, ester-based semi-rigid polyurethane, reticulated ester polyurethane, rebonded polyurethane, ethyl vinyl acetate (polyethylene-co-vinyl acetate), EPDM, melamine formaldehyde resin, cellular rubber, sponge rubber, viscose sponge

  • Cutting tools

    GB2

  • Cutting speed

    Standard: max. 50 m/min, option: max. 80 m/min

Foundation plan

BSM

Standard

  • Grinding unit

    Efficient grinding in a very stable, powerful grinding unit using grinding disks with a diameter of 125 mm

  • Grinding dust extraction

    For extracting the grinding dust during the grinding process.

  • Automatic retainer adjustment

  • B+ Connect

    Networking of the machinery and the operative functions.

    More information
  • Swiveling operation panel

    Easy to use with an intuitive touch panel.

  • Motor-driven pressure roller adjustment

    Synchronization of the pressure roller with the table for less deflection, for cutting thin sheets and special materials.

  • Reversing table without vacuum unit

  • Manual cutting angle adjustment using a hand wheel

    Efficient operation due to possible angle adjustment range between 0° and 7°. The angle of the knife is varied depending on different materials and cutting thicknesses in order to get the best cutting result

Options

  • Cooling unit

    In order to guarantee a safe operation of the machine, the entire interior of the switch cabinet is cooled.

  • Motor-driven pressure roller adjustment

  • Ionization unit

  • Vacuum unit

    The vacuum unit ensures an optimal fixation of the material to be cut during the cutting process.

  • Motor-driven cutting angle adjustment

  • Automatic grinding unit

    System for a knife continuously sharpened in-phase

  • De-stacking unit

    De-stacking unit for the automatic and precise de-stacking of the cut sheets. The sheet stack can be unloaded to the side or to the back.

  • Taking-off belt

    Placed downstream of the machine for continuous cutting in a cutting line.

  • Circular cross cutter

    When the required foil length is reached, the foil can be cut by the downstream cross cutting device.

  • Special equipment for cutting thin foils

  • Reinforced table drive

Compare other machines of the category "Splitting"

BSR-HS - Horizontal splitting machine

BSR-HS

Horizontal splitting machine

Cutting very hard and compact materials, band saw

Split-HE 500 - The horizontal foam splitting machine

Split-HE 500

Horizontal Splitting Machine

Splitting of hard-to-split and extremely hard-to-split materials, reversing table

BSM

Horizontal splitting machine

What Bäumer offers

Looking for the right machine for your needs?

Bäumer offers a wide range of individual machines that meet your specific requirements. Explore our foam cutting machines to find the right solution for your needs.

Machines

Find out how your processes can benefit from Bäumer.

Process optimization with the right software: With our software solutions, we provide you with the tools that enable you to react quickly to the day-to-day demands of the market.

Software

Customized services for unique processes.

The many different people, machines and processes in a company do not fit into any general scheme. Discover our solutions for a wide range of different needs.

Services