The stationary ABLG-2 is usually integrated into the main control of the block storage and/or crane hall.
|Width||2200 mm||2500 mm|
PUR ether and polyester, HR, CMHR, visco foam
GB2, TB1 No. 22, TB1 No. 41
Main control integration
The ABLG-2 control is incorporated into the block storage control and/or the crane storage control.
Networking of the machinery and the operative functions.
For the precise grinding of the circulating ground band knife. Adjusted pneumatically and used for cyclical grinding during foaming. Grinding time and cycle intervals are pre-programmed.
Frequency-controlled height adjustment motor
For the individual adaptation/attribution of the cutting unit to different foam qualities. Particularly recommended for very heavy foams or qualities with high strain hardnesses, respectively.
Length measuring system
Feeds the block very precisely during belt feeding, even minimal deviations are prevented.
In order to guarantee a safe operation of the machine, the entire interior of the switch cabinet is cooled.
Pneumatic adjustment of the grinding unit
Grinding dust extraction
For extracting the grinding dust during the grinding process.
Reinforced transport conveyor
For automated block transport when the machine is used in cutting lines. Equipped with transport conveyors of various lengths upstream and downstream of cutting unit.
Various control solutions for numerous applications available. From the wiring in a terminal box to an all-automatic control.