OFS-HE3 + OFS-VS

Cutting center featuring horizontal contour cutting machine OFS-HE 3, height-adjustable take-off conveyor and vertical contour cutting machine OFS-VS

Cutting line for contours OFS-HE3 + OFS-VS

Utilization of the cutting line for pure mattress or furniture cuts as well as for 3D contours and technical parts

  • High capacity and flexibility of the cutting centre as both contour cutting machines can process different jobs at the same time.
  • Fully automatic sheet transport from the horizontal to the vertical contour cutting machine
  • Consistently high cut quality with no manual intervention in the production process (unmanned)
  • Both machines are linked to each other and are controlled by a superior software (POS)
  • Automatic production of 3D parts in one process instead of time-consuming gluing
  • System flexibly adapts to different space requirements - the machines can be arranged in a line or integrated in complete cutting lines

Key Facts

Application

Upholstery, mattresses, furniture, packaging and automotive industry as well as technical articlesContour cutting (horizontal knife)

Material

PUR soft foam, PUR HR foam, visco-elastic foam, latex, non-woven material, Basotect®

Cutting Tool

Precision-ground micro-toothed circulating knife 3 x 0.6 mm

Technical Data

Alignment station

  • Inclinable belt with integrated air cushions
  • For the lateral alignment of a rectangular block before it is processed at the horizontal contour cutting machine.
  • A manual aligning of the block is not necessary anymore.
  • Can also be used with visco-elastic foam

Loading and unloading conveyors

  • Allow an automatic loading and unloading and thus a continuous production flow
  • Positioning upstream or downstream of the machine, respectively
  • With horizontal machines, the unloading conveyors can also be placed on the side.
  • Prevention of idle times of the machine

POS (Production Order System)

  • The machines can be incorporated into the POS (Production Order System) superior job management system by means of a corresponding software module and are hence part of a complete machine network.

Separator

  • For the lateral aligning of one block as well as for the separation of two blocks upstream of the OFS-HE3
  • For higher accuracies of the cutting result: the seperator creates a gap between two blocks which is then used by the automatic centre support of the OFS-HE3 as an additional support of the knife

Shuttle

  • E. g. for the transport of the material between both contour cutting machines if they are positioned parallel to each other
  • Automatic charging of machines replaces manual charging
  • Individual traverse paths depending on application and space conditions

Bäumer Newsletter

Stay up to date with the Bäumer-Newsletter

About us

The Albrecht Bäumer GmbH & Co. KG has been a leading manufacturer of machines and equipment for the foam industry for 70 years. The company focus is on special machinery and equipment. In this area, we have grown as a medium-sized company from pioneer to world leader.