Cutting line OFS-HE3 and OFS-VS

Upholstery, mattresses, furniture, packaging and automotive industry as well as technical articlesContour cutting (horizontal knife)

PUR soft foam, PUR HR foam, visco-elastic foam, latex, non-woven material, Basotect®

Precision-ground micro-toothed circulating knife 3 x 0.6 mm

For the lateral alignment of a rectangular block before it is processed at the horizontal contour cutting machine.

A manual aligning of the block is not necessary anymore

Inclinable belt with integrated air cushions

Can also be used with visco-elastic foam

Allow an automatic loading and unloading and thus a continuous production flow

Positioning upstream or downstream of the machine, respectively

With horizontal machines, the unloading conveyors can also be placed on the side

Prevention of idle times of the machine

The machines can be incorporated into the POS (Production Order System) superior job management system by means of a corresponding software module and are hence part of a complete machine network

Automatic charging of machines replaces manual charging

E. g. for the transport of the material between both contour cutting machines if they are positioned parallel to each other

Individual traverse paths depending on application and space conditions

For the lateral aligning of one block as well as for the separation of two blocks upstream of the OFS-HE3

For higher accuracies of the cutting result: the seperator creates a gap between two blocks which is then used by the automatic centre support of the OFS-HE3 as an additional support of the knife