BSL-214

• Dimensions

  	Standard	Options
  Width	2200 mm	2400 mm
  Height	1300 mm	1500 mm
  Length	3050 mm	2600 mm

• Material

  Ether-based polyurethane, flame-protected ether polyurethane, high resilience PU foam, viscoelastic ether-based polyurethane, flame-protected viscoelastic PU foam, combustion-modified highly resilient PU foam, reticulated ether-based polyurethane, CM-PU ether foam, ester-based polyurethane, reticulated PU ester foam, rebonded polyurethane, melamine formaldehyde resin

• Cutting tools

  GB2, TB1 No. 22, TB1 No. 41

• Cutting speed

  max. 80 m/min

Standard

• Grinding unit

  Efficient grinding with a very stable and powerful motor-driven grinding unit with cup wheel grinding disks.

• Cutting angle adjustment

  Through motor-driven swivelling of the cutting unit from -1 to +6°, optimal cutting angles are created and sheets of precise thicknesses can be cut.

• Vacuum unit

  The vacuum unit ensures an optimal fixation of the material to be cut during the cutting process.

• Grinding dust extraction

  It is used for extracting the grinding dust during the grinding process.

• SOPHIEaccess

  Networking of the machinery and the operative functions.

  More information

Options

• Loading and unloading conveyors

  The loading and unloading conveyors enable automatic loading and unloading for a continuous flow of production. They enable the use in a cutting line. To be positioned upstream and downstream of the machine.

• Reinforced table drive

  The reinforced table drive is necessary for total block weights over 400 kg or for a table length of 3300 mm or longer.

• Height-adjustable take-off conveyor

  The height-adjustable take-off conveyor separates the cut sheet stacks from the residual block and feeds them to the downstream conveyor belt system. This function can be used to take away both single sheets as well as several stacked sheets for further processing. It is often used in combination with our vertical contour cutting machine OFS-VS since it facilitates production in a production line. For cutting sheet stacks with a sheet thickness exceeding 80 mm, the take-off conveyor can be pneumatically raised at the end in order to prevent any offset of the split sheets.

• Cooling unit

  In order to guarantee a safe operation of the machine, the entire interior of the switch cabinet is cooled.

• Silicone spraying device

  The silicone spraying device wets the knife binding at intervals, minimizing the frictional forces between the binding and the material to be cut. This reduces sheet offset.